SBS Cargo Car MK2

Uploaded · September 12, 2022

If you liked this item, please rate it up on Steam Workshop page.

Author: ElfBossHogg

Last revision: 1 Aug, 2022 at 13:12 UTC

File size: 1.08 MB

On Steam Workshop

Description:

SeaBoss Systems (SBS) Cargo Car to match the PUMA MK1/MK2 High Speed Trains (HST)

If you are running the PUMA MK2 HST you can activate the Power Assist Motors in the car to assist with speed control…

Ensure that the train number set by your number pad matches the train set number of the Master Engine (HST). By default the number will be 222 (if the number pad is left as 0). This number is reflected on the display panel on the outside of the train and the panel visible to the interior seating section. All of the SBS train elements in your "chain" should have the same number.
Click on ACTIVATE ASSIST MOTORS, this will light up the top part of the radial segment as green. This will activate electrical motors on the car which are powered internally by batteries but recharged by the hitch connection to the main train engines. If there is a Master Engine present the two centre radials will light white indicating a positive integration. The motors will automatically adjust in order to assist in bringing the entire train to the requested speed as defined by the Master Engine (HST)
If the train car is pointing opposite the direction of the currently defined Master Engine (HST) then click the REVERSE DIRECTION button, this will light up the bottom part of the radial segment as yellow. This is necessary to ensure that the wheel spin direction reflects the proper direction as defined by the Master.

NOTE: Each train engine should be able to provide enough electrical power generation to power 1.5 additional cars. Ideal setup is 1 car with ACTIVE ASSIST per engine in order to acquire max speed.