Douglas DC-3 "JTI" (Still Wip 99% finished)(Update 5)
Update Log: moved to the update tab no more space xD
—————————————————————————————–
Things left to do.
1.small details some displays need their functions
2. radio system, displays for radios are already placed inside the plane logic is left to do.
—————————————————————————————-
—————————————————————————————-
—————Manual—————-
Engine Startup
1. Turn ON Battery Master OR Use External Power source
2. Set Fuel Selector To 1 (Left Main Tank)
3. Make sure you got + fuel Pressure (0.5) is usually the case
4. Turn ON Booster Pump should give 14-15 in pressure. OBS only turn on Boost pump for the
selected engine to start, because it drains quite alot of power.
5. Set Throttle to 0.1 this will give around 11 rps
(Recommend to use up down arrows to set both throttles to the same value)
6. Press Starter switch and add primer as needed
7. Let the engine spin some revolutions to get to starting rps (Around 10 propeller turns or so)
8.turn ON the ignition switch and engine should start.
9. Turn OFF Booster pump when engine get stable
10. Make sure that you have fuel pressure.
The engine driven fuel pump should give 6-7 in pressure depending on the rps and usage.
11. Turn Generators, because power is good 🙂
12. turn on inverter for certain instrument to work like the airspeed and altimeter e.t.c
——————————————————————————————–
Takeoff
——————————————————————————————-
Cruise
——————————————————————————————–
Landing
——————————————————————————————–
MicroControllers:
Compass Heading:
https://steamcommunity.com/sharedfiles/filedetails/?id=2626346475
Manifold Pressure number stabilizer:
https://steamcommunity.com/sharedfiles/filedetails/?id=1585455110
Random number generator:
https://steamcommunity.com/sharedfiles/filedetails/?id=1809824008
Engine controller (modified)
https://steamcommunity.com/sharedfiles/filedetails/?id=2278421381
Pitot Heat:
https://steamcommunity.com/sharedfiles/filedetails/?id=2728496907
