Skymods

Stormworks: Build and Rescue Mods Catalogue

F-35B USMC (armed)

Uploaded ·

If you liked this item, please rate it up on Steam Workshop page.

Author: unippu

Last revision: 1 Apr, 2022 at 13:28 UTC

File size: 961.54 KB

On Steam Workshop

Description:

United States Marines Corp painting

almost 1:1 scale. (real scale)
Length : 15.75m (15.61m)
Width : 10.75m (10.67m)
Height : 4.5m (4.36m)

range : 350km (cruise), 100km (full throttle)
max speed : 269knot (flying),50knot (STOVL)
It has 4 chaffs and air to air refueling port.

Control
  • Current flight mode can be seen at the right panel seven segment. You should set idling when you change flight mode on the ground.
    0:CTOL, It completely performs as a aircraft.
    1:STOL([5]key), You can change rps from 10 to 40 to adjust speed or altitude. And you can change jet exhaust angle while cruise mode. Altitude hold is not available.
    2:STOVL([5] and [6]key), It cruises about 40knot and hold altitude.
    3:VTOL([6]key), It performs like a helicopter.
  • Keyboard control
    a/d
    w/s
    left/right
    up/down
    CTOL
    roll
    pitch
    yaw
    throttle
    STOL
    roll
    pitch / nozzle angle (cruise)
    yaw
    throttle
    STOVL
    roll
    pitch
    yaw
    altitude
    VTOL
    roll
    forward/back
    yaw
    altitude
  • Mouse control
    Level is updated when you activated mouse control mode ([2]key).
    Alt hold and heading hold are unavailable.
    a/d
    w/s
    look X
    look Y
    CTOL
    roll
    throttle
    yaw
    pitch
    STOL
    roll
    throttle
    yaw
    pitch
    STOVL
    roll
    altitude
    yaw
    pitch
    VTOL
    roll
    forward/back
    yaw
    altitude
  • Flight assist
    These functions are available in only CTOL mode. You can see "{}" sign on the HUDs if they are active.
    Horizontal hold : When this function is active and you push neither [a]key nor [d]key, it keeps horizontal.
    Altitude hold : When this function is active, it holds altitude and you can change the setpoint by pushing [w]key(descent) or [s]key(climb).
    Heading hold : When this function is active and you push neither [left]key nor [right]key, it keeps the last pushed direction.
    Fix heading : You can fix target heading by keypad A value (0~360degrees). Touch (A) button on the biggest screen to update.
    STOVL cruise : When this function is active, you can change jet exhaust angle of the STOL. Or the speed setpoint of the VTOL mode becomes sticky.
  • Trim
    You can fix angle or rotation speed by switching the trim flip switch on the right panel.
    It is reset when you switched off it.
    Roll : STOL or STOVL, VTOL
    Pitch : STOL or STOVL
    Yaw or Rudder : always
  • Reverser
    When it is idling, it can go forward or back by ducted fan power.
    Just press throttle key while idling to use it.

Central monitor

You can switch map, fcs and assist, camera by touching bottom white lines.
Map explanation : https://steamcommunity.com/sharedfiles/filedetails/?id=2730476986

FCS

You can select an ordinance by touching monitor. (White or dark gray 4px lines are selectable.)
You have to switch Master arm switches on the center panel to use selected hardpoint ordinances.
You have to switch Jettison or Jettison all switches on the center panel to release hardpoint ordinances.
You can use it by pushing trigger key.
Hold select : Touch HOLD button on the monitor to hold selection (hardpoint only).
Open bay : Touch BAY button on the monitor to open or close weapons bay manually.
Auto select : If it has a same ordinance, the fcs automatically changes hardpoint.
Click here if you’d like it to recognize any ordinance other people made.

Communicating data between the FCS and an ordinance
  • Sending from the FCS
    On/Off 1:master arm, 2:trigger
  • Return from an ordinance
    Number 1:ID, 2:current amount, 3:max amount
    On/Off 1:Active or not, 2:Ready or not, 3:Launch, 4:Lockable or not
  • Rules
    Empty ID is 34~. (You can add more)
    Current amount and max amount must be at least 1.
    Detail : https://steamcommunity.com/workshop/filedetails/?id=2655522690

Multi Function Display

You can see some information at 1*1 monitors.
You can change the visible information by touching small lines at the bottom of the monitors.
Detail : https://steamcommunity.com/sharedfiles/filedetails/?id=2731055048

  1. Fuel consumption and range, remaining time.
  2. Simple radar. You can change display range.
  3. Radar detector warns when the it detects 3sec constant radar wave. You can deactivate alert.
  4. Beacon detector shows estimated beacon distance.
  5. Map. It can zoom and scroll.
  6. Camera : You can switch forward cam or bottom cam.

center HUD : https://steamcommunity.com/sharedfiles/filedetails/?id=2136926352

Repaint is OK !
Re-uploading needs my permission ! Please contact me before uploading !

Download

Tags: