Auto Mixer
This script will set the correct value needed to get the mix you want compensating for temperature
this script doesn’t use the output pipe, but instead calculates the mix needed to compensate for temperature difference
note: this does not care what’s in the target pipe so if the mix is already wrong this will not fix it
This script also has a temperature check for safety which will turn off and lock mixer
good for when mixing fuel, you can just set a high number if not wanted.
Setup:
Setup is pretty simple
you need a mixer, pipes, 2x analyzer and ofc the IC stuff
d0 – mixer
d1 – input 1 analyzer
d2 – input 2 analyzer
be sure the analyzer is on pipes that go into the mixer , don’t put anything like a valve between the analyzer and mixer
Add script to IC, set desired ratio for input 1 pipe, Set Max temperature (kelvin) or set really high to disable the check
Turn script on and it will adjust the value of your mixer, and will continue to adjust as needed
manually turn on/off mixer
If mixer says locked, check the temperature of your pipes / the MaxTemp setting
