OMNI FRB11 Fast Response Boat 11m

Omni International Industries Fast Response Boat 11m – FRB11

"Where others fail, OMNI excels."

The FRB11 is designed as a all weather high speed Search and Rescue Vessel.

Features:

– Omni-Thrust automatic propulsion system.
-60+knots
-150km+ range
-GPS map – OmniMap+ with Nav, beacon finder, radio direction finder and radar
-Weather Computer – OmniWx – Displays all relevant wind info, temp, clock, humidity.
-Autopilot – Heading hold and waypoint hold.
-Lights – Nav, Mast lights, spotlights
-Digital Dashboard
-Annunciator panel
-Stabilization system
-Water cannon
-Communication radio
-Relevant handheld equipment
-Automatic bilge system
-Artic ready

Operating instructions:
1. Overhead panel: Master switch and Systems switch: On
2. Start/stop Engine: key located right side of steering wheel – throttle any position.
3. Throttle lever also operates F/N/R Forward/Neutral/Reverse automatically.

Pitch trim can be but rarely needs to be adjusted. The main time it’s useful to be moved from the neutral position is when facing strong headwinds. The bow can be pitched down to pierce waves and make better speed into strong winds.

OmniWx displays relevant weather information focussing on wind. Units can be changed by clicking on them on the touch screen.

OmniMap+ functions as a GPS nav with waypoint input that also feeds into the autopilot. It also features Emergency beacon finder, Radio Direction Finder, and Radar.
Modes can be changed at the bottom of the screen with the left and right touch arrows between Nav, EBL,RDF.

Radar can be activated on any mode by touching the R on the right side of the screen.

EBL/RDF modes have a "clear" button for resetting the signals. It’s the C on the right side of the screen.

The menu at the top center of the screen allows users to change unit types and set the RDF frequency.

Autopilot is fully touchscreen and functions with heading hold (HD) and waypoint hold (WP).
Yellow indicates selected but not active.
Red indicates not active.
Green indicates active.
Grey indicates N/A.

Heading hold (HD) will hold current heading and can be adjusted with the +/- touch controls
Waypoint hold (WP) is available after entering waypoint coordinates into the keypad. It will hold bearing to waypoint and circle in the area upon arriving to the waypoint.

When the autopilot is not active it will display current heading.
Heading hold (HD) will display set heading while active
Waypoint hold (WP) will display bearing to waypoint while active.

—————————————————-

Join the OMNI Discord server!
https://discord.gg/8fgww37tgN

—————————————————–

*Heavily Modified version of 404_Gordon_Not_Found’s Sports Car Gauge Cluster.
https://steamcommunity.com/sharedfiles/filedetails/?id=2514086171

**Beacon locator inspired by Illy’s and used with permission.

*** Do not re-upload

**** All OMNI vehicles are made and tested with HIGH physics settings. Use of any other physics settings is not recommended and will void warranty.