[CTS] Locomotive
I am glad to present a new line of railway locomotives, wagons and everything connected with them. This is the first, but most likely not the last locomotive.
Speed without wagons – 200 km/h
Acceleration from 0 to 100 (without wagons) – 4.95 sec.
Speed with CTS wagons – 150-200 km/h
Two identical cabins
Two medium generators providing power to the locomotive and wagons
Two medium electric motors that allow the locomotive to accelerate well
Huge power reserve
Suspension can be raised for repairs
To start the locomotive, enter one of the cabs and press the large "ON" button in the center. The generator will start automatically.
By default, both connectors are retracted and disabled. To enable them, click the corresponding buttons on the right.
Reverse can be enabled in any of the cabins by pressing the trigger (spacebar by default). If the direction of travel does not match the direction of the cab, a small monitor with a reversing camera will turn on.
Remember to turn cruise control off when leaving the cab.
If one locomotive does not have enough power to pull a large number of wagons normally, one more locomotive can be connected to the train. Turn on "Passive Mode" on one locomotive and control from another.
P.S. passive mode will not be enabled if the connector is not connected to anything.
