China Railway (CZ2612) No. 12 Swingnose crossing

If you liked this item, please rate it up on Steam Workshop page.

Author: aoxiang

Last revision: 1 Jan at 19:35 UTC

File size: 20.36 MB

On Steam Workshop

Description:

本模组最终解释权归属布里啾啾车辆厂aoxiang分厂

The CZ2612-12 movable point turnout is a widely applicable type of turnout, suitable for 250kph passenger dedicated lines in areas where laying No. 18 turnouts is difficult. It has a maximum forward speed of 250kph and a lateral speed of 50kph. During the sixth major speed increase of China’s railways, high-speed trains were introduced on existing lines. Lines such as the Beijing-Shanghai line also replaced a large number of No. 12 movable point turnouts on existing lines to accommodate the 200kph speed increase.
On a fixed railway crossing, the wheels need only drift by a small angle, say 1 in 20, before the vehicle may start to go in the wrong direction at the V of a V-crossing. This problem can limit the maximum speed of vehicles using the crossing.In addition, the open gap at a fixed V-crossing forms a weak point on the railway line where the heavily loaded wheel must bump across the resulting gap of about 10 cm (4 in), supported only by the portion of the wheel tread which is on the wing rail. This pounds the rail so much that the steel can deform and/or wear away. This damage may easily spread to other components including the wheels, and the noise can be a nuisance. Scheduling repair of damage can also be a problem in high traffic locations.Swingnose crossings virtually eliminate the gap at V-crossings allowing for higher vehicle speeds.

Available：2000

This mod used the depot animation so the dpot icons will be a little inconvenient. You can hide the depot icons like this:

↓↓↓↓↓↓

If you have any questions or bug feedback, please let me know in the discussion or comment section. Please use English or Chinese, which can help me understand your meaning faster. Thank you!