Escape Room 3 : Using Force and Prying
Defy all odds and escape this difficult cage. If you haven’t played the previous rooms, you should before attempting this.
Hint 1: First things first: Get those bearing bars out of the way. Use the Connection Tool.
Hint 2: Use pistons to push back against the piston door keeping you inside.
Hint 3: Once you have pushed the piston door back enough, try and push yourself out using a piston through the gap you create.
—————————————————————————————————————————————
This map uses Pieman’s Rules of Escape.
1. You can not delete any blocks except for barrier blocks (striped) and blocks you place.
2. You can ONLY place controllers, switches, barrier blocks, pistons, and bearings.
3. You can only use your connect tool and hammer. YOU MAY NOT DISCONNECT PISTONS FROM CONTROLLERS OR SWITCHES/BUTTONS FROM CONTROLLERS.
4. You may interact with anything (edit controllers, pistons, press buttons, etc.) that you can get to following rules 1-3.
5. You must start on the 4×4 red square and press the green switch(es) (if one is present) before beginning your escape. You aren’t allowed to turn the green switch(es) off.
To be considered "free", you must be 25 blocks away from any part of the escape room.
To make a map compatible with Pieman’s Rules of Escape: Paint a 4×4 red square on the ground as the start point.
If anything should happen before the escape starts, build a switch and color it green, as the player must press any green switches if they are present.
Then, in your description, paste these rules.
—————————————————————————————————————————————
