FFMS HTV A2 (Basic structure)
A revision of my FFMS HTV A1 series Heavy Transport Series.
I reworked most of the engine connections and logic connections, however it mostly sits in a usable and upgradeable state. (I uploaded this after a comment ate at me, stating it no longer worked and bursts into flames xD)
Shouldn’t be too many issues, mostly friction and gearing, but it does in fact drive well at 30% throttle.
Specifications:
– Large Flatbed (can be fitted with a crane, winch, ISO container mounts, fluid storage tanks or other modifications.)
– Forward mounted spotlights
– Small forward cargo/utility area (I was going to put a detachable generator and tilt mechanism but too slack at the moment so go ham!)
– Driver and Passenger seat.
– A modest fuel capacity of 2800L
– Medium premade engine.
– Uses an electric radiator which MUST BE SWITCHED ON via the small switches located on the right next to the interior light.
Notes:
– Want to refit driver/passenger cab section so the control terminals span the whole front section and remove dividing throttle segment.
– Many control instruments not hooked up due to time constraints and laziness.
– Simple exterior as I wanted to change how it looked with all the new equipment but just never got around to it.
– WIP will keep adding to or changing but probably won’t be uploading those small changes.
Feel free to use as you please, but please make sure to credit any work that is not your own! (Mine or otherwise 🙂 )
