Arctic Wolf
A Powerful Beast ready to take on the harsh temperatures and weather in the freezing arctic. With a very… unique design
One of my first Creations I’ve Published that actually functions I am very Proud of how she came out and how well she performs
Startup procedure
-Turn on all Breakers
-Set jet throttle to 50 (DO NOT GO OVER 70 OR THE ENGINE WILL NOT START UP AGAIN)
-hold down starter button (Via pilot seat) until you hear the engines engage
-Press clutch button and set clutch using lever
-Set Collective to 1 using w/s (sticky) [Collective indication is present on the top when you are in 3rd person and on a small gauge on an instrument panel within the cockpit]
-Disengage the brakes
Specs.
-Two Full Sized jet Engines
-Medium generator
-Large battery
-Two Aircraft Propellars
-Five Passenger seats
-Four Heaters
-Three Arctic Outfits
Packed with 12,000 literes of jet fuel she can take you to the arctic and back if you are running the engines efficiently
OR she can take you to the arctic and allow you to take all the alternate routes and back to the main island before she needs to refuel
When she is efficiently running it takes about 15 minutes to travel to the arctic
While traveling full speed she can stop within .5km by activating the brake in disengaging the collective by using the overhead buttons or hotkeys in the pilot seat
The engine runs most efficiently when the jet throttle is set to 50, and with the Clutch and Collective fully applied
On the top of the train between the two jet intakes are 3 Displays the first displays whether the brake is applied
In the middle is a gauge that will display the propellers collective the red line will represent what the props current collective value is. the white line will display what the collective value will be when the collective is engaged.
The third display represents whether the collective is engaged or not it shows a green propeller that is spinning
Thank you for subscribing if you did. If not thank you for checking it out, as i mentioned before its one of my first successful creations and i would be very upset if all of my hard work was stolen and reposted!