Shark Hunter

If you liked this item, please rate it up on Steam Workshop page.

Author: shakishaki

Last revision: 8 Mar, 2019 at 13:37 UTC

File size: 1.55 MB

On Steam Workshop

Description:

Have you ever been bullied by a shark? I have. After escaping from the vehicle off the coast, it was dragged into the sea many times and swayed like a rag doll. I swore I will take revenge someday.

And … the time of hunting came.

~~~ How to Hunt shark ~~~~~~~~
1. Stop the ship once it is off the coast.
2. Wear a Diving / Scuba Suit under the steering wheel.
3. Stand up the edge of the cage (Hotkey "2")
4. Sink the cage completely in the sea (Hotkey "6")
5. Lower the edge of the cage (Hotkey "2")
6. Wait a while ….

7. When sharks appear, they advance a little faster. Sharks with large turning radius hardly enter the cage unless they advance.
  When the speed reaches a certain speed (Speed ​​= 4 – 8), the shark becomes an elliptical orbit and approaches the center of the cage.
8. Raise the cage to the capture position. As a guide, there is not much clearance from the hull which floats when setting up a cage (Winch length = 6 ~ 8).
9. When the shark enters the cage, let’s put the edge of the cage a little quickly (Hotkey "2")
10. If you can secure it, pull up the cage (Hotkey "5").
~~~~~~~~

· The captured cage can be separated from the hull by Toggle Button in front of the cage. Please use it as it has a connector at the front of the cage and the ceiling of the cockpit.
· The end of the cage can be operated independently from front to back, left and right. It is also possible to catch a shark and descend one end only to get off.
· Since two equipments of scuba are prepared, you can stay for a long time if you change quickly in the sea. Please pay attention to oxygen shortage.

Now, good hunting !!