F/A-18D Hornet

If you liked this item, please rate it up on Steam Workshop page.

Author: zerosen555

Last revision: 11 Jul, 2021 at 05:57 UTC

File size: 2.8 MB

On Steam Workshop

Description:
McDonnell Douglas F/A-18D Hornet

[v1.0.18]
Please paint your favorite squadron number.
Using modded block in part.

Enjoy your flight.

Also one seat type F/A-18C .

Specifications

-Crew…………2
-Speed……….100~290 knots
-Fuel…………..5000 L (Internal)
-Auto Pilot
-Heading Hold
-Altitude Hold

Control

Optimized for keyboard control.
-w/s…………Pitch
-a/d………….Roll
-up/down….Throttle
-left/right…..Yaw
-Key[1]……..Ctrl
-Key[2]……..Air Brake
-Key[3]……..Select
-Key[4]……..Release/Shoot
[1]+[1]……..Push to Talk (Keep hold of second click)Not yet.
-[1]+[2]……..Reset Attitude
-[1]+[3]……..Select Display
-[1]+[4]……..Flare

DDI Pages

Tactical Pages (Left side menu)
> Store Management System Page
> Radar Page
> HUD Page
> FLIR Page

Support Pages (Right side menu)
> Flight Control System Page
> Electronic Attitude Director Indicator (EADI) Page
> Flare Setting Page
> Trim Setting Page

How to Flight

1 .Turn on "Battery".
2 .Set Trim from "Trim Setting Page".
3 .Release wheel brake.
4 .Taxing & Take off. (Throttle 15~)
*While "NWS-Hi" is on you can brake with "S(Pitch Up)".

How to Landing

1 .Toggle "Reset ATT(Attitude) ([1]+[2])"
2 .Extend landing gear.
3 .Set throttle to 10.
4 .Adjust altitude with throttle.(Throttle 7~9)

Recommend Throttle Settings

-Taxing…..1~3
-Flight…….15~
-Landing…~10

How to use Ordnance

1 .Turn on "Master ARM" switch (Center Console).
2 .Select "A/A" or "A/G" (Center Console).
3 .Select Ordnance with "Select Weapon" (Key[3]).
4 .Shoot with "Shoot/Release" (Key[4]).

How to use Targeting Pod

1 .Turn on "FLIR" switch (Right Console).
2 .Select "FLIR" page from DDI pages.
3 .Select Display "FLIR" page is displayed with "Select Display"[1]+[3].
-[1]+Left/Right…….Camera Roll
-[1]+Up/Down……Camera Pitch

Using Items

APG-3B Airborne AESA RWS Radar
Smaller text and numbers LUA example
Customizable Compass Module
3D Map
[3×3] GPS Autopilot

##### Work in Progress #####

-2021/07/11
Change to new hardpoint connectors.

##### Work in Progress #####