The CG-62 ‘Dragonfly’ | A SAR & Firefighting Seaplane [JSI]
The CG-62 is a capable SAR & firefighting seaplane, the latest and greatest vehicle produced by
CG-Industries. It comes with all the standard visibility and lighting you’d expect on any CG-Industries vehicle.
The CG-62 has over 300km of range at cruise throttle, and can land anywhere amongst the expansive
stormworks ocean, with a little bit of skill, it can also be landed on small lakes and rivers.
The CG-62 has firefighting capabilities. With 2 water tanks which can hold 2000L each fully loaded,
putting out fires won’t be hard.
The CG-62 has been proudly published under the JSI branding.
- Over 300KM of range
- 10,562L of fuel
- All standard lighting
- Seating for up to 10 people
- Full interior
- Radar System
- Beacon locator system
- Emergency Flares
- Plenty of first-person equipment
- Full advanced cockpit
- Firefighting systems
- Altitude hold
- GPS Autopilot
- Automatic bilge pumps
- Engine maintenance hatches
- Adaptive prop pitch
- Great all-round visibility
- Radio System
- Over 160kts top speed
-Turn on main battery
-Turn on avionics and hydraulics
-Turn on engine 1 & 2 electric
-Turn on all fuel pumps and fuel cutoff
-Press engine 1 & 2 compressors (Leave these buttons enabled)
-Set throttle to 30
-Once engines 1 & 2 RPS reach 30, lift the propeller clutches.
-Set the prop pitch to 0.25 for taxi
-Unfold the wings once you are clear of obstacles
-Pitch up fully and set the prop pitch to 1 for takeoff
Thanks to the following people for helping me and providing microcontrollers
used in this vehicle:
- Sheepdog
- Acc_Original
- PenguinO
- Uran_wind
- Tajin
- Energy
- Markers622
- Die Gurke
Please note: Certain features on this vehicle are unfinished or broken, but 99% of
the systems operate as they should, and I am working to fix certain things through
updates to this vehicle.
Please do not re-upload this vehicle without my permission