NordahlLunden NLH200 Mallard – Medium utility and SAR helicopter
The NHL200 is medium utility helicopter it is equipped for SAR, Cargo and personnel transport duties. Boasting excellent seating capacity and outstanding range. Powered by a very efficient triple turbine turboshaft engine and equipped with the AISC-31 (Advanced Infrared Search Camera) this helicopter can fullfill the needs of almost any non combat mission.
Click the image to view to full NordahlLunden collection
- Autopilot and automatic altitude hold.
- Very efficient engine.
- 2 Crew seats and a large number of passenger seats.
- Extendable rescue harness crane.
- Fully stabilized searchlight and tracking camera.
- Search radar
- Chaff and RWR.
- Terrain collision warning system.
- Atmospheric instruments.
- HSI.
- Encrypted radio.
- NVD Hud.
- Foldable tail
- Nav, anti collision, taxi, and landing lights.
- Cargo winch with hardpoint connectors.
Information
All instruments in the helicopter are in metric. And the PFD speed readout is IAS
Tail folded length: 15.75m, full length 20.75m
Height: 2.25m
Width: 4.25m
Top speed: 325 Km/h= 175 Knots
Range: 400 Km in "Flight" engine operating mode and 485 Km in "Cruise" engine operating mode.
12 passenger seats and 1 medical bed.
Radar range of 12 kilometers.
Do not engage cruise mode while grounded! Cruise mode should only be engaged when you have already taken off.
For best results using the autopilot you should allow the helicopter to align itself without cruise mode and after that activate cruise mode. It is suggested to disable cruise mode about 700 meters before the waypoint. If you do engage cruise mode and autopilot simultaneously make sure that the turn that it needs to make is not sharp.
Ignoring these instructions may lead to loss of control of the aircraft!
1. Flick the power switch. Located in the middle of bottom part of the front panel.
2. Unfold tail. Button is located on the overhead panel above the camera operator. Search for a orange indicator.
3. To start the engine find the engine fuel line and master switches. Located in the middle of the overhead panel. Place the engine in "Flight" operating mode
4. Turn on navigation and anti collision lights. Switches located on the overhead panel above the camera operator.
5. Turn on engine and electrical data displays. Located in the middle of the overhead panel.
6. Turn on fuel computer. Switch located in the top part of the front panel.
7. Turn on HUD and PFD. Switches located on the overhead panel in front of the camera operator.
8. Disengage rotor break and select the desired engine operating mode.
9. Wait for engine rps to reach 13.
10. Flick the FCS switch on the overhead panel. Located in the middle of the overhead panel.
List of non critical systems
- Weather screen. Switch located in the top part of the front panel.
- Map. Switch located in the middle part of the overhead panel
- HSI. Swich located in the top part of the front panel.
- Radar. Switch located in the overhead panel in front of the camera operator
- Radio and encryptor. Swich located in the top part of the front panel.
——-
Have fun!If you have questions comment below or message me on discord Keh#9554.
You are NOT allowed to reupload this vehicle or any of it’s non workshop microcontrollers without permission.
If you find your microcontroller used in this vehicle and you have not been credited message me and I’ll fix it right away.Credits- PFD by Ping|Archimaede
- HUD by toriran
- Engine data, eletrical data displays and map by jbaker96
- HSI by Hally
- Radio encryptor by Hunter Falkner
- Fuel computer by Firyst
- Radar controller by Zizo
- Skyblaze searchlight and camera control system by TomDRV
- Weather screen and radio by jecki1379
- Flight and engine controllers by Uran_Wind
Changelog
-17.12.2021 Added cruise mode, enlarged fuel tanks.
-18.12.2021 Adjusted the PFD speed settings.
-19.12.2021 Update with new NordahlLunden paitjob and logo plus some more detailing work. Desgination changed from UJH-52 to NLH200.
-8.1.20221 Fixed issues caused by devs changing the microcontroller mass.If you find any issues and need help with them or want to discuss about possible future vehicles and current projects. Click the image to join our discord.

