FCR2M1 Fire control radar
- Uses new radar
- Because it uses coordinate transformation, it can be used even upside down https://steamcommunity.com/sharedfiles/filedetails/?id=2935067531
- Compatible with SR1 https://steamcommunity.com/sharedfiles/filedetails/?id=2772824489
- Use the least squares method for noise reduction
ELI2 is in world coordinates
X represents east and west. East is the positive direction. It is the same coordinate system as the X of the GPS sensor.
Y stands for North and South. North is the positive direction. It is the same coordinate system as the Y of the GPS sensor.
Z stands for altitude. Up is the positive direction. It is in the same coordinate system as the altitude sensor values.
Output ELI2.
numeric channel
1 Target X [m]
2 Target Y [m]
3 Target Z [m]
4 Target Vx [m/tick]
5 Target Vy [m/tick]
6 Target Vz [m/tick]
logical channel
1 detected
1 Turn on Power
2 Aim the radar at the target with WASD
3 When the red circle appears, press the Autoaim button (If you don’t use Autoaim, there may be errors)
4 If Locked! is displayed, the target position and velocity are output to ELI2.
For other detailed operations and mechanisms, please watch the video.
- You can remodel it.
- You may distribute it secondarily (if you modify it).
- You can incorporate it.
- You can make a video.
- You don’t have to get permission.