ALP Keeper / OSV – AHTS
SHIP HISTORY
The ALP Future-class vessels of the SX157 design were developed in close collaboration with ALP Maritime.
The vessels are outfitted with DP2 and anchor handling capacity in order to assist during the installation/hook-up phase for the towed objects.
oceangoing tug. With a bollard pull, The vessel is designed for towing very large structures over long distances, such as oil rigs or FPSOs from the building yards to the installation site at the oil field.
Go to the wheelhouse and sit in the Captains’s seat on the right hand side.
Mid panel – two key switches.
System On and Start Engine
The instrument panel is minimalist for a nice experience.
Length: 51,00m
Beam : 11,75m
Draft : 4,00 m
Mass : ~ 93,000
Fuel : 53000 liters
Top Speed: 22 kts (you can increase the speed by setting the MAX value on the lever to 20.. Top Speed = 30 ish KNT)
– There are Two water cannons on top of the bridge – Two touch screens on port side to controll them.
– MOB crane, Can be operated from Bridge and MOB Crane (instrument panel)
– Small Triceps Track crane, Controlled by helm at the crane deck area.
– Helia main crane is controlled from the crane operator seat in the bridge.
– Dynamic positioning (HOW TO USE: To enable the DP, the RPS limiter (lever) and the Throttle from seat must be turned down) – increased battery drainage
– Autopilot (touch)
– Interactive map
– Weather monitor
– Radar (do not work on multiplayer)
– Course monitor
– Emergency beacon locator/transmitter
– Realistic navigation lights
– Radio
– Anchor monitor
Instrument panel bridge.
– Bridge ligt
– Deck light
– Exterior/path lights
– Bow light
– Heater
– Deck Small spotlight
– Bow and stern thrusters (toggle)
This ship and her sister ship were a culmination of ideas and design between two friends. Mosski reached out to me and asked for help on a project he wanted to start. His idea was to build the ALP AHTS. We collaborated and discussed the design and size. We both loved the idea and decided to make sister ships. And so was born the ALP Keeper and the ALP defender. We continued to bounce ideas off each other and help each other out. The final result is two ships that are different but share many of the same parts and design.
Please check out Mosski`s ALP Defender: https://steamcommunity.com/sharedfiles/filedetails/?id=2397951606
Modular map:
https://steamcommunity.com/sharedfiles/filedetails/?id=2176463130&searchtext=modular+map+
Touchscreen Winch Control:
https://steamcommunity.com/sharedfiles/filedetails/?id=2289508267&searchtext=
Touchscreen Beacon Locator & Transmitter:
https://steamcommunity.com/sharedfiles/filedetails/?id=2277826803&searchtext=
Touchscreen Auto Heater:
https://steamcommunity.com/sharedfiles/filedetails/?id=2257443282
Microcontroller from:
https://steamcommunity.com/sharedfiles/filedetails/?id=1936436237
Dynamic Positioning:
https://steamcommunity.com/sharedfiles/filedetails/?id=2372883593
NJ 1×1 Radio With Touch Controls:
https://steamcommunity.com/sharedfiles/filedetails/?id=2280999235
NJ 1×1 Data Screen 4 Labels:
https://steamcommunity.com/sharedfiles/filedetails/?id=2280999896
NJ 2×1 Marine Navigation Lights Control Panel:
https://steamcommunity.com/sharedfiles/filedetails/?id=2280998825
Have I forgotten you? Please contact me and I will credit you:)
Feel free to join our discord server where we regularly post updates on current projects and sometimes stream the building.
