Steam Engine Pm 36-2 "Beautiful Helen"
Weight: 102.3t
Max speed: ca 220 kph
Piękna Helena, or Beautiful Helen
Startup and use:
- Light the firebox (press 1 on the Engineer Seat)
- Turn on the Blower
- Set the Reverser to forward or reverse (using the W/S axis on the Engineer Seat)
- Wait for pressure to build to around 2 at
- Turn the Blower off
- Open the Cylinder ♥♥♥♥♥* (decorative/realistic reasons only, use every time you try to move the loco from a halt)
- Apply the Regulator (using the A/D axis on the Engineer Seat)
- Once you start moving slowly, close the Cylinder ♥♥♥♥♥.
* pardon the censorship, but that is how they are called.
Brakes are used by the A/D axis on the Engineer Seat – they will only apply once Regulator has been reduced to 0 (pressing D).
Track Switch system:
https://steamcommunity.com/sharedfiles/filedetails/?id=2829206372
Recommended Track Signal Add-on:
https://steamcommunity.com/sharedfiles/filedetails/?id=2829206372
These mods aren’t actually required, but do check them out to give their creator appropriate views.
PKP class Pm36 was a 1937 experimental class of Polish State Railways’ express steam engines. Only two vehicles were produced: the streamlined Pm36-1 and Pm36-2, without the streamlining. Only Piękna Helena would survive to modern day and is still operational. The 4-6-2 engine was capable of up to 130 kph with short of 1800 HP.
Required items:
Click the title to search on this site.
Zizo Directional Rail Switcher — Steam Workshop
Zizo Railroad Signals Enhanced — Steam Workshop
