CONSUMPTION 1×2 by krimwand
In addition to new design, it now works without delay, but still uses the average value from 180 measurements, so that there are no sharp garbage jumps. Two scales one display a supply of fuel, the second percentage consumption. Using a touchscreen, you can switch the indicators.
shows
- litre per hourminsec
- consumption in percent from the maximum registered
- consumption at 100kmmilesknots
- remaining time to work (min)
- range kmmilesknots
- efficiency rating (convenient for comparing generators)
- amount of fuel
- capacity of fuel tanks
- fuel level in percent
- filling time in minutes and seconds
connecting
- video output to 1×2 monitor
- monitor composite to microcontroller input
- speed sensor m/sec to microcontroller input
- fluid level from fluid meter or from standart tank content
- fluid capacity from fluid meter (if you have standart tanks – specify their number in the microcontroller settings)
- buzzer node to buzzer (optional)
- generator or torque to generator or torque output ))
Colors
- sc = screen.setColor
- dark background – sc(4,4,4)
- monitor background – sc(35,48,20)
- traces of numbers – sc(32,44,17)
- shadow inside monitor – sc(25,30,12)
- gray text – sc(40,40,40)
- secondary white text – sc(70,70,70)
- black text – sc(4,4,4)
- scale – sc(20,20,20)
- scale shadow – sc(3,3,3)
- green – sc(15,60,15)
- orange – sc(70,40,10)
- blue – sc(10,30,70)
- red – sc(60, 10, 10)
