On-board Combustion Centrifuge
Some code that might help you with your mining/recycling automation.
Thise script dosn’t need to use IC housing as it work directly with centryfuge. Place it in IC10 Centryfuge slot and turn it on, and it start to work. Also, you don’t need to stop it manualy for ore export. This script automaticly count the all items that you insert and stops when reach certian amount.
Work on H2/O2 mix. Probably work with NO2, but I don’t recomend it
Use IC housing: No
Support safity protocols: No
Allow manual control: No
Support external devices: Yes. Use Diode Side for data output
Support NO2 fuel: not recomended
Max Rpm**: 483
Working Rpm**: 460
Max Stress procent**: 58
Averge Stress procent**: 25.3
Ore capasity: 2500+ g
Allow custom Ore capasity: Yes
Export at Rpm: 30
from 0 to 100 Rpm: 27.97 seconds
from 0 to working Rpm: 2 mintes 38 seconds
from working Rpm to 100: 4 minutes 3 seconds
from working Rpm to 30: 5 minutes 4 seconds
Temperaturs: from -134 to +420 Degrees Celsius
Pressure: from 0 to 300 kPa
Perfect working condition: vaccum
Fuel temperature: from -120 to +40 Degrees Celsius
Fuel pressure: minimum 1 kPa
Power usage: 50 W
Fuel mix: H2/O2 at ratio 3:1
Working internal pressure*: 7.2 Mpa
Working internal temperature*: +1721 Degrees Celsius
*for pefrect conditions
**for perfect conditions and perfect H2/O2 fuel mix
If you found a bug or want to see more fetures, please report me in comments.
