Nuclear Self Loading Container Ship / NS Shah

If you liked this item, please rate it up on Steam Workshop page.

Authors: G_Tugg, enigma

Last revision: 24 Jun, 2023 at 13:57 UTC

File size: 11.41 MB

On Steam Workshop

Description:

NS Shah.


The Shah is a civilian nuclear Ro-Ro container ship, owned & operated by SARLIFT.

The ship is capable of independently retrieving and delivering containers with her onboard tractor and loading ramp

The semi automatic crane allows easy transfer and arrangement of containers onto the deck.

Stats

Unit Cost: $430k

Powerplant: Nuclear

Top Speed: 26kt

Container Storage: 7 default / 21 maximum

Fluid storage tank: 20,000l

Notable Features

Onboard self-loading container tractor

Intelligent loading ramp – auto detects correct position

Semi automatic container crane

Waypoint Autopilot

Dual-Axis Active Stability

Advanced 360 manoeuvring thrusters

Automatic lighting, Bilge Pumps, Aircon

Computer game entertainment

Lifeboat x1

Optimised for no lights or physic warnings

Instructions

Reactor is started in the reactor room at the rear of the ship.

If you are in Career mode, fill the reactor boilers and core using the desalinator system in the reactor room before use. The reactor can also receive fresh water from service vehicles (much faster to fill).

You can begin to move once the reactor is at its operating temperature of 400C and boiler is at its operating temperature of 150C, and then wait around 2-3 minutes for the steam turbines to start, once they reach around 20 rps you can begin to sail.

If the reactor becomes oversaturated after several hour of use it can be shut down, purged and refilled. You can port the radioactive waste to the ocean (illegal) or to a specialised handling vehicle at port (not included).

The tractor can remotely activate the loading ramp from the cab.

Container Handling Instructions

1. Retrieve a container with the tractor

2. reverse up the loading ramp and dock with the ship, toggle the tractors container connectors off

3. Set the crane to the Loading position, then lower the crane once in position and grab the container

4. raise the crane and then select a loading position, ensure that the target loading position has its floor connectors off

5. lower the container once in position, toggle the floor connectors.

* NOTE the ship is capable of double or even triple stacking containers, this is not recommended due to the ‘snap’ physics when connecting the containers. If double stacking, leaving a 1 container gap between upper containers is recommended.

Always toggle the floor connectors after the connectors on the crane have disconnected to avoid any damage.

Recommend saving the game frequently when used during career in case of user error damage.

With Special Thanks

Special thanks to build partner (°□°)

Link to video game