Cooler SD60M
This was created before Nate’s SD60M. It was uploaded before but it got taken down cuz of the thumbnail lol. anyway i would recommend Nate’s over this, and this is only being called "cooler" because it has a funny story behind it.
original description (no context)
"
It’s finally here after lots of demand!
So some things I want to clarify with this mod will be listed below:
The front nose UV is mapped smaller than the rest of the locomotive, so you will have to manually change the sizing.
The Cab and the Long hood has a separate UV, due to this being kitbashed, so you will have to look at the file to make sure you use the right texture.
I have not made any UV textures for this, so if you want to find specific spots, you will need blender, or base it off of other liveries.
Some of the couplers are janky, so when you rotate the model, you will have to move it a bit to get it back into place.
There are no sounds or effects on the model, so feel free to add your own.
Lastly, there are no number-boards in the back due to this being a Utah Belt mod originally.
Contributors:
Doggo: For giving me a cab to base the windows on. (thanks doggo!)
Halton: YO GUYS I THINK HALTON MADE SOME OF THE NUMBER BOARDS ON THE FRONT OR SOMETHING, I AM TELLING YOU THIS BECAUSE I LEGALLY HAVE TO GIVE CREDIT FOR 8 VERTICIES OR ELSE I WILL GET SKINNED. I used his window frames from his C40-8M mod pack as a base for the boolean. (thank you halton!)
Jeri: Slicing the cab off of the standard SD60 for me to use after many requests for the long hood to be accurate! Jeri also has given me motivation to keep working on this model! (Thank you Jeri, you are the reason this is here!)
Camoguy: I used his Union Pacific logos from one of his AC44 packs. (Thank you camo! I don’t know how you found that logo lol)
ABStudios: At least 60% of the model was originally made by him, and I can not thank him enough for his contributions to the Rolling Line community. The long hood, frame, trucks, etc where made by him. Originally, the cab has based off of his SD75, then nose was then replaced by Doggo’s model.
Utah Belt Project: This project was the reason this model was started. Right now I don’t plan on finishing the UB spec, due to reasons not related to this. (i will not elaborate lol)
"
