Skymods

Stormworks: Build and Rescue Mods Catalogue

ENDAIR RJ100 [Stormlink Compatible]

Uploaded ·

If you liked this item, please rate it up on Steam Workshop page.

Author: EnderPilot

Last revision: 22 May, 2021 at 21:55 UTC

File size: 5.43 MB

On Steam Workshop

Description:
ENDAIR RJ100

The ENDAIR RJ100 is a passenger Regional aircraft developed by EPVIN Aviation Company
It has a Top speed of 260Knots, has a range of over 200KM. Also features a realistic cockpit!
The configuration is 3-3 in economy class and a 2-2 in business

NOTE: PLEASE DO NOT MODIFY OR RE-UPLOAD THIS VEHICLE


CAPACITY: 54 Passengers

Tested to be lag and Multiplayer friendly while holding great shape and performance!

COCKPIT FEATURES:
  • Analog and digital Artificial horizon and compass
  • Digital Heading indicator
  • Dial panel for monitoring engine stats
  • Fuel consumption Calculator
  • Radio comutication for both pilots
  • Autopilot, Altitude hold, Roll stabilisation
  • a blackbox and flight tracking channel with frequency set to 19
  • extendable-retractable Flaps
  • extendable-retractable Spoilers
  • extendable-retractable Landing gear
  • Take-Give control to Captain or First Officer
  • Evacuation Mode
  • Fire suppression systems
  • 2 hydraulic systems
  • Cabin light and heating controls
  • Nav, Strobe, Landing, Taxi and beacon lights
  • Seatbelt and No Smoking Panel and warning
  • Back splitable spoiler [Like a real Avro jet]
    HOW TO GET IN:

    Go to any of the front doors then press the button bellow the red text
    and then jump and grab the handle next to the door button and bring your self up

    STARTUP PROCEDURE:

    1. Open Battery and avionics
    2. Open Instrument backlight (Optional)
    3. Open EN1 EN2 EN3 EN4 Fuel pumps
    4. Open all the Hydraulic systems
    5. Open all GEN Systems
    6. Open EN1 EN2 EN3 EN4 Fuel cutoffs
    7. Open EN1 and EN2 Starters
    8. Open Beacon

    APU STARTUP PROCEDURE:

    1. Open APU Fuel pump
    2. Open APU Starter

    AUTOPILOT SETUP:

    Tip Take a moment before takeoff to input your desired coordinates and Altitude to the aircraft!

    1. Set up your waypoint coordinates on the Autopilot Coordinates Panel
    2. Press the Engage Autopilot Button
    3. Enable FD

    ALTITUDE SETUP:

    1. Set up your desired Altitude on the Altitude Hold Panel
    2. Press the ALT HOLD Button
    3. Enable FD

    BLACKBOX AND FLIGHT TRACKING:

    On channel: 19 there is a compisote signal transmition that holds flight information

    THROTTLE:

    *120% Takeoff
    *110-80% Cruise [Its most efficient at 110%]
    *65-55% Landing
    *11% Taxiing

    CREDITS

    CONSUMPTION 1×1 By krimwand

    Consider leaving a Rating and a Comment if you like the creation.
    If you find any Bugs please report them down below
Download

Tags: