ENDAIR 787-8 [Stormlink Compatible]
The ENDAIR 787-8 Dreamliner is the most advanced plane we have created!
A Long-Haul passenger aircraft developed by EPVIN Aviation Company
It has a Top speed of 260Knots, has a range of over 1000KM. Also features a realistic cockpit!
As well as 3 different classes!
The configuration in First Class is 1-1-1 Witch also features fully factional entertainment system!
In business class its 2-2-2
And in economy its 2-4-2
[Requires modded workbench or custom mission to spawn]
- Primary Flight Computer (Like in a real Boeing)
- Analog and Digital Artificial horizon
- EICAS Monitoring systems
- INFO Diagram
- Map
- Fuel consumption Calculator
- Radio commutation for both pilots
- Autopilot, Altitude hold, Roll stabilization
- a blackbox and flight tracking channel with frequency set to 19
- extendable-retractable Flaps
- extendable-retractable Landing gear
- Take-Give control to Captain or First Officer
- Evacuation Mode
- Fire supression systems
- 3 hydraulic systems
- Cabin light and heating controls
- Nav, Strobe, Landing, Taxi and beacon lights
- Seatbelt and No Smoking Panel and warning
- Reverse thrust
How to use the PFD screen:
there is a 1×1 on the center console that has 3 options
1. NAV = Which has the Map and gps
2. EICAS = Which has the engine status
3. INF = Which has a diagram of the aircraft and its opened/closed doors
You can select either one by pressing them on the screen!HOW TO GET IN:Go to any of the front doors then jump to the visible handle and press the button next of the small window
and then jump and grab the handle next to the door button and bring your self upOR
Use the "Home" Button on your keyboard and no-clip your self in!
STARTUP PROCEDURE:1. Open the Primary flight computer
2. Open Battery and avionics
3. Open All 3 PFD Controllers
4. Open all GEN Systems
5. Open all Hydaulic systems
6. Open EN1 and EN2 Fuel cutoff and pumps
7. Open EN1 and EN2 Starters
8. Open BeaconAPU STARTUP PROCEDURE:1. Open APU Hydraulic system
2. Open APU Auto StarterAUTOPILOT SETUP:Tip Take a moment before takeoff to input your desired coordinates and Altitude to the aircraft!
1. Set up your waypoint coordinates on the Autopilot Coordinates Panel
2. Press the Engage Autopilot Button
3. Enable FDALTITUDE SETUP:1. Set up your desired Altitude on the Altitude Hold Panel
2. Press the ALT HOLD Button
3. Enable FDBLACKBOX AND FLIGHT TRACKING:On channel: 19 there is a composite signal transition that holds flight information
THROTTLE:*130% Takeoff
*120-80% Cruise [Its most efficient at 110-120%]
*50-45% Landing
*11% TaxiingCREDITS3d MAP by Buunuu
CONSUMPTION 1×1 By krimwand
AH (modded) by Markers662Consider leaving a Rating and a Comment if you like the creation.
If you find any Bugs please report them down below