ENDAIR A350-900 [Synthwave Livery] [Stormlink Compatible]
The ENDAIR A350-900 is by far the most advanced plane we have created in every aspect!
It has All the autonomy you will ever need! As well as Auto-landing capability!
which you can activate in the cockpit! [Instructions Further in Description]
It has a Top speed of 260Knots, has a range of over 2000KM. Also features a realistic cockpit!
As well as 3 different classes!
First Class also features fully factional entertainment system!
And also features a cargo bay under the real galley!
- [Passenger Capacity for Stormlink is 100]
Discord
Get the latest updates about my plane projects on my discord server! : https://discord.gg/8YrrV9YJHM
NOTE: PLEASE DO NOT MODIFY OR RE-UPLOAD THIS VEHICLE[Requires modded workbench or custom mission to spawn]
STARTUP PROCEDURE: - You can read the startup instructions from here
OR
For more realism you can read the checklist that is in the cockpit!1. Open Battery 1
2. Open avionics
3. Open all ADIRS IR
4. Confirm That the screens are self testing
5. Open APU SW Master
6. Open APU Starter
7. Open ECAM Screen
8. Press and Hold the Fire test button
9. Confirm that all 3 Fire warnings are displayed in the Center Screen
10. Open all GND Hydraulics
11. Open beacon Light12. Open all ENG Hydraulics
13. Open all ENG Fuel Pumps and Fuel Cutoffs
14. Open APU Bleed and X Bleed Auto
15. Open EICAS Screen
16. Start EN1 and Confirm it stabilizes on the Center Screen
17. Start EN2 and Confirm it stabilizes on the Center Screen
18. After Takeoff, Shutdown the APUHow to use the PFD screens:
there are some buttons next to all of the screens with labeled:
1. EICAS = Which displays the engine status
2. Fuel Computer = Which displays the fuel computer and range calculato
3. ECAM = Which displays all aircraft messages or errors
4. HSI = Which displays a diagram of a conventional heading indicator
5. NAV = Which displays a MAP, heading and position of the aircraft
6. CAM = Which displays a tail mounted camera for better navigation
You can select either one by pressing the button next of the screen!AUTOLAND SETUP:Tip Take a moment before takeoff to input your desired coordinates and Altitude to the aircraft!
1. Set a waypoint on the START of the desired runway
2. Insert the Waypoint into the AUTOLAND Keyboard and press ”Import Starting Point Of The Runway”
3. Set a waypoint on the END of the desired runway
4. Insert the Waypoint into the AUTOLAND Keyboard and press ”Import Ending Point Of The Runway”
5. Enable the F/D
5. Enable Autoland
[You DO Need to lower the landing gear]AUTOPILOT SETUP:1. Set up your waypoint coordinates on the Autopilot Coordinates Panel
2. Enable FD
3. Enable AutoPilotALTITUDE SETUP:1. Set up your desired Altitude on the Altitude Hold Panel
2. Press the ALT HOLD Button
3. Enable FDBLACKBOX AND FLIGHT TRACKING:On channel: 19 there is a composite signal transition that holds flight information
THROTTLE:*1 Takeoff
*1 – 0.8 Cruise [Its most efficient at 0.9]
*0.5 – 0.45 Landing
*0.11 TaxiingCREDITShttps://steamcommunity.com/sharedfiles/filedetails/?id=2374729163 : HSI by Hally
https://steamcommunity.com/sharedfiles/filedetails/?id=2092441495 : Modified AH by markers622
https://steamcommunity.com/sharedfiles/filedetails/?id=2229865932 : Inspiration for the AH from AirStrikeOnLinehttps://steamcommunity.com/sharedfiles/filedetails/?id=1799889445 : 3D Maps by Buunuu
https://steamcommunity.com/sharedfiles/filedetails/?id=2028815133 : Coms by PenguinO
https://steamcommunity.com/sharedfiles/filedetails/?id=1761878368 : Custom dials by WH1T3_No1SE
https://steamcommunity.com/sharedfiles/filedetails/?id=2392720367 : F.C by moonoom
https://steamcommunity.com/sharedfiles/filedetails/?id=2471096948 : Checklist by MrNJersey
https://steamcommunity.com/sharedfiles/filedetails/?id=2562145559 : Modified AL by khhobbs
Consider leaving a Rating and a Comment if you like the creation.
If you find any Bugs please report them down below
