Antonov An 225 Mriya
This is a Antonov an 225 Mriya. It is not a recreation i merely built it for fun! I spent 55 hours hours on this project and it is all recorded on YouTube!
YOU HAVE TO USE THE RUNWAY TO TAKE OFF
I built this on YouTube time-lapses here – https://youtube.com/playlist?list=PLDP4MpdlWKHMcWaKlZsy94MK3pwcxN3xY
Start up procedure
1. Go to the back left panel and turn on
-avionics
-Main power
-Ramp power
-Lights
-Hydraulics a
-Hydraulics b
-Hydraulics c
2. Go to the Front right panel and turn on
-Engine 1 fuel pump to Engine 6 fuel pumps
-Engine 1 fuel pump electrics to Engine 6 fuel pump electrics
3. Go to the back left panel and turn the APU starter and APU starter electrics
4. Wait for the APU to start
5. Go to the top right panel and turn on
-Engine 1 generator on through Engine 6 generator on
-Turn engine 1 electrics through engine 6 electrics
6. Turn on engine 1 starter electrics and engine 1 starter
7. Wait for the engine to start
8. Repeat with engines 2-6
To take off/taxi
1. Turn off parking
2. to taxi you can use the Up/Down arrow to move the throttle up and down.
3. to take off you have to do full throttle
4. wait until 90 knots to rotate
5. Fold landing gear