ENDAIR A321 XLR SKYCARGO

[Requires modded workbench or custom mission to spawn]

* Analog and Digital Artificial horizon
* Map
* Fuel consumption Calculator
* Radio comutication for both pilots
* Autopilot, Altitude hold, Roll stabilisation
* a blackbox and flight tracking channel with frequency set to 19
* extendable-retractable Flaps
* extendable-retractable Spoilers
* extendable-retractable Landing gear
* Take-Give control to Captain or First Officer
* Fly-By-Wire Safety System [as featured in a real Airbus]
* Diching Mode [as featured in a real Airbus]
* Fire supression and test systems
* 3 hydraulic systems
* Cabin light and heating controls
* Nav, Strobe, Landing, Taxi and beacon lights
* Seatbelt and No Smoking Panel and warning
* Parking Brake

Go to any of the front doors then press the button below the small window
and then jump and grab the handle next to the door button and bring your self up

1. Open Battery and avionics
2. Open All 3 PFD Controlers
3. Open all Hydaulic systems
4. Open EN1 and EN2 Fuel cutoff and pumps
5. Open EN1 and EN2 GEN and BUS
6. Open EN1 and EN2 Starters
7. Open Beacon

1. Open APU Fuel pump
2. Open APU Starter

1. Set up your waypoint coordinates on the Autopilot Coordinates Panel
2. Press the Engage Autopilot Button
3. Enable FD

1. Set up your desired Altitude on the Altitude Hold Panel
2. Press the ALT HOLD Button
3. Enable FD

On channel: 19 there is a compisote signal transmition that holds flight information

*120% Takeoff
*110-80% Cruise [Its most eficient at 110%]
*30-25% Landing
*11% Taxiing

Billy-blij-1-2-3: Has offered great help with the New ALT HOLD AP Microcontroler!

3d MAP by Buunuu
CONSUMPTION 1×1 By krimwand
4 dials 1 display by michubushimax9