Rockwell B-1 Lancer Bomber
This is my Rockwell B-1 lancer.
Is armed with 2 cluster bombs and 5 medium (normal) bombs.
How to takeoff:
1) deactivate brakes and, using directional arrows, put the plane in the runway.
2) turn on brakes, turn on Systems (keybutton) and Start engines (another keybutton).
3) set throttle at 0.5, deactivate brakes and now you can do 2 things:
– active Takeoff wings (remember to deactivate this at an altitude around 50-100m)
– set an altitude value and turn on auto altitude system (flipswitch)
4)you are flying, you can chose to fly free (turn off auto altitude and roll stab); or fly with assist of auto altitude and roll stab
How to use bombs:
1) chose what tipe of bomb you want to use: cluster (strike in a big area with 27 little explosions) or medium (just one explosion of a medium explosive charge)
2) fly in the target direction
3) select the bomb type with flipswitch (the screen will show you the aiming screen), you can zoom with arrow buttons
4) when you see the target in the circle just press space, one or more time; each time you press space the plane drop 1 bomb of the type that you selected
5) when you finisched press again flipswitch to close bombs door
Different uses of up/down arrow:
– first use: to move plane in runway
– second use: to operate throttle when landing gears are in
– third use: move up and down the aiminig camera in free look mode
See video to compriend how to use the plane, if you are in trouble or if you have suggestions, or for whatever you want ( XD) write me in the comments 😀
Thanks to Zizo for his radar that he updated, it’s awesome go to see his page!
