Airbus A321 NEO with autoland

You will need a modifide hangar.
This aircraft is unique because of it’s highly automated and centrald computer system.
This aircraft has a fully capable Autoland, auto hold and other usefuly features.
Most of the functions are available in the midle 3 displays on the selection dispaly you can select wich screen do you want to interact with.
(recomended: https://steamcommunity.com/workshop/filedetails/?id=2456231959)

——————————————————————————————————
Statistics:
minimum fiying speed: 250 knot
Cruising speed: 300 knot
max speed(without APU): 380 knot (autospeed recomended)
(note: autopilot is recomended)
max speed(with APU):800 knot
Crusilg altitud: 2000ft (recomended)
max range(crusing speed): 2800km

——————————————————————————————————
HOW TURN ON

tap the middle screen and hit startup
——————————————————————————————————
Selection display:


with SW button you can swich wich page you want to see

Other then SW all the buttons have unique screens where different systems are manageable.

all 3 main displays have ther own selectoin displays and you can customize which screen do you want on any of the 3 displays

ENG = engines
TMP = temperature
PWR= power management
APU = APU
FUL = fuel
LDG = landing gear
TRO = trotle
RAW = custom ranway selector
MAP = MAP + autoland map
LIG = light indoor + outdoor
TMA = transponder map
CAM = cameras
RLI = trabsponder list
WAP = waypoint/autoland list
TRA = tracer through front camera

SW = swiching page
——————————————————————————————————
TRO Trottle:

if you select AUTO then auto trotle is enable and manula is diabled
the top green/blue/red buttons are sincronised contorls they operate all 4/2 (depending on aircraft)
TRUR: trustreverser:
useis 100% trust but with no spoiler also disables AUTO trust
START: hold this button untill both engines are lit up (usaly 1-2 sec)
STOP: you can stop eather engins

——————————————————————————————————
MAP:

Use RWS button to setup waypoint / autoland / holding

With ADD SCREEN WAYPOINT you can add the screen’s waypoint to the list
With ADD KEYPAD WAYPOINT you can add the keypad’s waypoint to the list

With SETUP AIRPORT you can choose an airport wich will used by the autoland
(note: if you don’ t use airport antenna pack you have to choos custom runway wich is addresseble in RAW tab)

Here you can choose which airport do you want
(note: only works with antenna pack and a you have been closer than 40 km onece from the choosen airport.)
(note: on the right side there is a scrolling slider)

here with SWR you can swich runway diricton
(note: light blue is selected)
if you want to add afther the last cordinate hit ADD SC (note: afher landing you have to clear the landing in WAP)
Afther OK buton you can enable autoland wich is locatad in fornt of the pilot
if you enable autoland the plane will directly goes to the entery point of approch

if you hit SETUP HOLDING on chooes on option screen then you have to do the following

here you can choose if you want to start with the keypad or the screen waypoint

in the butom right corner are zoom in/out and c = centre to startpont of holding
the minimum recomended is 2 km by 5 km
if you done seting it up hit SETUP then turn on autospeed, altitud hold and waypoint hold
you can exit from holding fase in WAP menu
——————————————————————————————————
WAP = waypoint list:

here your list of waypoints
if you did set up a scheduled landing or a holding you can find it here
with red scueres you can delate an operation
(note: if the list is empty the plane will start to go to 0 0 cordinate)

——————————————————————————————————
FUL fuel screen:

——————————————————————————————————
LDG landing gear:

if AUTO is on then the plane will extend/retrect kanding gear automaticly (note: manual mod is disabled then)
——————————————————————————————————
RAW custom runway:

waypoints are importable from keypad by clicing to them.
in CHOOSE AN AIRPORT mode you need to select custom runway to use this option (note: landing hight is avarege of other airports hight)
——————————————————————————————————

Speed hold:
on the Trotle page select auto (to enabel autotrotle)
above the center display hit speed hold
——————————————————————————————————
altitude hold:
above the center display hit altitude hold
——————————————————————————————————
waipont hold:

in the middle screen(map) with the RWS button choose one waipont setting(shown as light blue)
on the selection dispaly click SW
on the selection dispaly click WAP
here you can see all the selected waiponts
with the red square you can delate an item form the list

next to the speed selector you can turn on waipont hold

——————————————————————————————————

APU:
on selection display select FUL
then select APU fuel
on selection display select APU
hit ON button

——————————————————————————————————
Autoland with incuded airport option:
on the middle screen(map) with the RWS button choose setup airport
click on one option then hit autolend in fornt of the capitans seat
——————————————————————————————————